Datto Networking App: Power Devices

Topic

This article describes what information is available about Power Devices within the Datto Networking App.

Environment

  • Datto Networking App
  • Datto Managed Power

Overview

The Datto Networking App provides a mobile insight into the status of power devices in your network. Tasks such as renaming a power device, replacing it with another, or power cycling an outlet can be performed.

Procedure

  1. In the Networks page, scroll to the network that houses your switch.

  2. Select View Network, or Power Devices.

  3. Select the power device you wish to view information about.

The following information and actions are available for your switch:

  1. Press this icon to return to the previous page.
  2. Pressing this icon will display a prompt to edit the name of your switch.
  3. Pressing this icon will display the following settings on the bottom of your page:

  1. Manage Ports: Allows you to manage the ports on your power device.
  2. Reboot: Reboots the device.
  3. Replace: Allows you to replace a device with another of the same type.
  4. Delete: Removes the device from your network.

  1. Last Check-in: Displays the last time the device checked-in to Datto's servers.
  2. Check-in History: Displays a graphical timeline of device check-ins.
  3. Uptime: Displays how long the device has been powered on.
  4. Surge Protection Status: Displays if the power device has surge protection enabled, and is protecting against voltage spikes.

Press Power Cycle next to any port to immediately power cycle it.

  1. Power Consumption: Displays a graphical timeline of power consumption per port, in watts.

  1. MAC Address: Displays the MAC Address of the device.
  2. LAN IP Address: Displays the LAN IP address of the device.
  3. Mesh IP Address: Displays the Mesh-healing IP address of the device.
  4. Firmware Version: Displays the firmware the device is currently running.